UNIVERSAL DIVIDING HEAD
UNIVERSAL DIVIDING HEAD

UNIVERSAL DIVIDING HEAD


The HOMGE’S Universal Dividing Head is designed for all types of gear cutting. Precision dividing and spiral dividing (except Type BS-0 and BS-1) work with greater precision and efficiency than has been possible before. 

The center face can be tilted from a horizontal positionof 90º down to -10º from vertical, and inclinations can be read off a scale graduated in degrees. The center is built to the highest engineering standards and is factory inspected and tested to ensure complete satisfaction. 

The ratio of worm to gear is 40:1. 

REMARK:"Operation and Service Manual" is included for reference 
 
STANDARD ACCESSORIES:
  • Tail Stock
  • Dividing Plate Set 
OPTIONAL ACCESSORIES:
  • 6" or 7" 3-Jaw Chuck 

 
 

UNIVERSAL DIVIDING HEAD BS-2
Unit: mm/inch
ModelABHhabgTaper of centerWeight (kg)
BS-23651413/322721045/64236919/64132.7515/64213825/6413459/32165/8B&S No.1073
TAIL STOCK FOR UNIVERSAL DIVIDING HEAD BS-2
Unit: mm/inch
ModelA1a1b1g1H1Center Height (h2)Weight (kg)Measurement M3
BS-2194741/64177662/64125459/64165/8147550/64Max. 138Min. 115Packed with the dividing Head
STANDARD ACCESSORIES:
DIVIDING PLATE A, B, C
NUMBER OF HOLES OF DIVIDING PLATE (WORM GEAR REDUCTION RATIO 40:1)
 
Number of holesPlate A151617181920
Plate B212327293133
Plate C373941434749