ELECTRO-PERMANENT MAGNETIC INDEX TABLE

Special pneumatic cylinder design, as massive load is on disk, it reduces friction and assures high accuracy and repeatability.
Coupling gear is made of high quality bearing steel, high rigidity, high precision, accuracy does not change with the hours of use.
Magnetic force as high as 1250/100cm2 ± 5% (4 magnetic poles).
No need to continuously supply power when in use, no wire interference, no temperature rise, good for continued use in a long time.
Strong tightening device, heavy load cutting.

Most suitable for boring bed, milling machine, surface grinder, precision division.
Workpiece thickness requirement above 10mm.
Holding workpiece requires contact from at least 4 magnetic poles.
Provide five-sided processing, one time processing step.

SPECIFICATIONS

Model			ECMC-PI300	ECMC-PI470	ECMC-PI600	ECMC-PI800
1	Length x Width		300X300mm	470X470mm	600X600mm	800X800mm
2	Length		188	198	229	304
3	Drive mode	Vertical	Pressure 5 ~ 8kgs/cm²
3	Drive mode	Turning	Manual
4	Theoretical maximum vertical load value		1200	2400	3400	4500
5	Allowable load weight (kg)		500	1000	2000	3000
6	Equal division		2,3,4,6,8,12,24	2,3,4,6,8,9,12,18,24,36,72
7	Disk turning direction		Clockwise and counterclockwise
8	Division degree		15°/mark	5°/mark
9	Weight (kg)		110	243	462	993
10	Magnetic pole dimensions		50X50 mm
11	Number of magnetic pole		16	49	72	144
12	Total magnetic force kgf ±5%		5000	15300	22500	45000
13	Voltage (single phase)		AC 220V
14	Controller		1N1C	1N2C	1N2C	1N4C
15	Voltage (single phase)		AC 380V ~ 440V
16	Controller		1N1C	1N2C	1N2C	1N4C