- Home
- Products
- ECMC-Magnetic Series
- ECMC-PI
Electro-Permanent Magnetic Index Table
- Special pneumatic cylinder design, as massive load is on disk, it reduces friction and assures high accuracy and repeatability.
- Coupling gear is made of high quality bearing steel, high rigidity, high precision, accuracy does not change with the hours of use.
- Magnetic force as high as 1250/100cm2 ± 5% (4 magnetic poles).
- No need to continuously supply power when in use, no wire interference, no temperature rise, good for continued use in a long time.
- Magnetic force is adjustable.
- Strong tightening device, heavy load cutting.
Applicable Range:
- Most suitable for boring bed, milling machine, surface grinder, precision division.
- Workpiece thickness requirement above 10mm.
- Holding workpiece requires contact from at least 4 magnetic poles.
- Provide five-sided processing, one time processing step.
SPECIFICATIONS
Model | ECMC-PI300 | ECMC-PI470 | ECMC-PI600 | ECMC-PI800 | ||
---|---|---|---|---|---|---|
1 | Length x Width | 300X300mm | 470X470mm | 600X600mm | 800X800mm | |
2 | Length | 188 | 198 | 229 | 304 | |
3 | Drive mode | Vertical | Pressure 5 ~ 8kgs/cm2 | |||
Turning | Manual | |||||
4 | Theoretical maximum vertical load value | 1200 | 2400 | 3400 | 4500 | |
5 | Allowable load weight (kg) | 500 | 1000 | 2000 | 3000 | |
6 | Equal division | 2,3,4,6,8,12,24 | 2,3,4,6,8,9,12,18,24,36,72 | |||
7 | Disk turning direction | Clockwise and counterclockwise | ||||
8 | Division degree | 15°/mark | 5°/mark | |||
9 | Weight (kg) | 110 | 243 | 462 | 993 | |
10 | Magnetic pole dimensions | 50X50 mm | ||||
11 | Number of magnetic pole | 16 | 49 | 72 | 144 | |
12 | Total magnetic force kgf ±5% | 5000 | 15300 | 22500 | 45000 | |
13 | Voltage (single phase) | AC 220V | ||||
14 | Controller | 1N1C | 1N2C | 1N2C | 1N4C | |
15 | Voltage (single phase) | AC 220V | ||||
16 | Controller | 1N1C | 1N2C | 1N2C | 1N4C |