- Increases the workholding capacity of CNC Machining Centers by holding 2 pieces in each vise.
- The design is also compact allowing several vices to be fitted to the work table.
- A special SPRING DEVICE allows an extra tolerance of up to 5mm in workpiece size enabling quick positioning and clamping.
If the tolerance of work-piece is more than 5mm, please adjust this screw.
The vise can hold 2 workpieces of different sizes. The maximum opening difference is 70mm.
Centre Jaw maybe removed to hold larger workpieces.
Once the centering Jaw is removed the vise is self centring.
|HDL-4”||92||63 ± 0.01||74||200||18||395||480||104||14||14||20|
|HDL-6”||118||80 ± 0.01||100||270||18||517||615||154||19||18||46|
- 2 pcs of Alignment Wedge
- 4 pcs of Clamp
- 1 pc of Handle
- Soft Jaws (4pcs/per set)