Universal Dividing Head
Model:BS-2
Product Description
  • The HOMGE’S Universal Dividing Head is designed for all types of gear cutting. Precision dividing and spiral dividing ( except Type BS-0, and BS-1 ) work with greater precision and efficiency than has been possible before. The center face can be tilted from a horizontal positionof 90º down to -10º from vertical, and inclinations can be read off a scale graduated in degrees. The center is built to the highest engineering standards and is factory inspected and tested to ensure complete satisfaction.The ratio of worm to gear is 40:1.
REMARk:“ Operation and Service Manual “ is included for reference
  • OPTIONAL ACCESSORy:

    • 3-Jaw Chuck
    6” or 7” 3-Jaw Chuck for BS-2
UNIVERSAL DIVIDING HEAD BS-2
Unit: mm/inch
NOModelABHhabgTaper of centerWeight (kg)
D-07 BS-2 365 1413/32 272 1045/64 236 919/64 132.7 515/64 213 825/64 134 59/32 16 5/8 B&S No.10 73
TAIL STOCk FOR UNIVERSAL DIVIDING HEAD BS-2
Unit: mm/inch
NOModelA1a1b1g1H1Center Height (h2)Weight (kg)Measurement M3
D-07 BS-2 194 741/64 177 662/64 125 459/64 16 5/8 147 550/64 Max. 138 Min. 115 Packed with the dividing Head
STANDARD ACCESSORIES:
DIVIDING PLATE A, B, C.
NUMBER OF HOLES OF DIVIDING PLATE (WORM GEAR REDUCTION RATIO 40:1)
Number of holes Plate A 15 16 17 18 19 20
Plate B 21 23 27 29 31 33
Plate C 37 39 41 43 47 49